Caltha LLP Project Summary

Project: Industrial Storm Water Permitting, SWPPP and Response To EPA Enforcement Action
Client: Large marina facility
Location(s): New York

Key Elements: Industrial stormwater permitting, SWPPP preparation, Response to Notice of Violation and Consent Order

Overview: Caltha provided technical services to the New York State marina facility to comply with the New York industrial stormwater permit. The marina had been subject to a sector compliance enforcement initiative and was determined to be in non-compliance with State and Federal industrial storm water permitting requirements. Services included preparing facility stormwater pollution prevention plans using Caltha’s New York SWPPP template, preparation of New York SPDES application forms (Notice of Intent), and preparation of site-specific inspection checklists to comply with New York inspection requirements applicable to this industrial sector.

Fuel Loading Area Without Drainage Control

Fuel Loading Area Without Secondary Containment

Caltha assisted the facility in preparing and submitting documentation required by US EPA to demonstration adequate response to compliance deficiencies. All documentation was reviewed and accepted by US EPA and no fines were levied on the facility. Caltha then provided ad hoc technical support to facility to address questions during roll-out of the compliance programs for both industrial stormwater discharges.

Phase I Environmental Inspection Finds Leaking Tanks And Pumps In Refueling Area

Environmental Inspection Finds Leaking Tanks And Pumps In Refueling Area

For more information on Caltha LLP SWPPP services, go to the Environmental Health & Safety Plan | Spill Plan Information Request Form.

SWPPP Consultant, PPC Plan Consultant, SPCC Consultant, Spill Plan, Emergency Response Plans, Stormwater permitting, SWPPP Training

Caltha LLP | Your Stormwater Permit, SWPPP and Spill Plan Partner


%d bloggers like this: